Admix Equipment | Liquid Ring Pump Specifications
Liquid Ring Pump Specifications
Overview | How it Works | Options | Datasheet
The LRP-425 Specifications are as follows:
| Motor Types | NEMA 213, IEC 112, or IEC 132 available in Stainless Steel, High Efficiency TEFC or TEXP, White Washdown Duty |
| Motor Size (HP) | 7.5 hp / 5.5 kw |
| Input Voltage | 3/60/230-460 |
| Full Load Amps | 230v: 19 amps / 460v: 9.4 amps |
| RPM | 1750 |
| Recommended Max Viscosity | 1500 cps |
| Max Flow Rates | 90 gallons / 340 liters per minute |
| Lift | Up to 19 feet / 5.8 meters (based on water) |
| Seal Types | Single or double mechanical seal, cartridge design |
| Impeller Setting | Motor stub shaft sets the impeller gap |
| Inlet / Outlet Size | 2 in. / 51 mm |
| Contact Surfaces | 316L with 32 Ra finish standard, Optional: 316L 10 Ra or 20 Ra, Electropolish |
| Drain (Optional) | 3/4 in. / 19mm Tri Clamp |